home Bandung, Mechanical Electrical Engineering TRAINING PVT AND RESERVOIR FLUID ANALYSIS





pelatihan PVT and Reservoir Fluid Analysis di bandung


Hydrocarbon systems found in petroleum reservoirs are known to display multi-phase behavior over wide ranges of pressure and temperatures. The most important phases which is occur in petroleum reservoirs are: liquid phase (crude oil or condensates) and gas phase (natural gases).  This course will explain the fundamentals of hydrocarbon phase behavior and practical application in reservoir and production engineering. Firstly it will reviews the principles of phase behavior and ilustrate the use of phase diagram in describing the volumetric behavior of single-component, two-component, and multi-component system.

Also it will present numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction, evaluation of properties of natural gases and introduces their application in Darcy’s equation and material balance equation.  A complete and cohesive independent unit on methods of determining the crude oil physical properties , presents the concept and application of  vapor-liquid phase equilibria, developments and advanced in the field of empirical cubic equation of state and application in petroleum engineering. Details sceheme of splitting and lumping of petroleum-fraction.

Properly understanding the reservoir fluid properties is very significant and are very importance steps  during the entire life of the oil and reservoir developments and operations. This five-day training will provide a comprehensive knowledge and understanding of reservoir fluid properties and application to reservoir and production engineering to keep exellent reservoir and production performance as long as possible.

* Refresh the knowledge of the participants on reservoir fluid properties.
* Understand the basic principles of hydrocarbon phase behavior and it’s application in petroleum engineering.
* Learn the numerous mathematical and graphical correlation for estimating physical and critical properties of the undefined petroleum fraction
* Enhance the knowledge on hydrocarbon phase behavior , freservoir fluid properties and application.
* Gain additional knowledge on reasent technology in reservoir fluid properties calculation and correlation.
* Knowledge sharing among the participants and instructors


Basic Phase Behavior
* Single Component  Systems
* Two Component  Systems
* Multy Component  Systems
* Classification of Reservoir and Reservoir Fluids

Pure Component Physical Properties and Characterizing Undefined Petroleum Fraction
* General Correlation for Estimating Physical Properties of Hydrocarbon Fraction
* Critical Compressibility Factors
* Characterizing Hydrocarbon Heavy Fractions
* Determining of Physical Properties of Heavy Petroleum Fraction from Correlation

Properties of Natural Gases
* Behavior of Ideal Gases
* Ideal Gas Mixtures
* Properties of Ideal Gas Mixtures
* Behavior of Real Gases
* Effect of Non Hydrocarbon Components on the Z-Factor
* Correction for Non Hydrocarbons
* Correction for High-Molecular-Weight Gases
* Direct Calculation of Compressibilty Factors
* Compressibility of Natural Gases
* Gas Formation Volume Factor
* Gas Viscosity
* Engineering Application of natural gases PVT Properties

Phase Behavior of Crude Oils
* Crude Oil Density and Specific Gravity
* Methods for Determining Density of Crude Oils as Unknown Composition
* Methods for Determining Density of Liquids as Unknown Composition
* Isothermal Compressibility Coefficient of Undersaturated Crude Oils
* Density of Undersarurated Crude Oils
* Gas Solubility
* Oil Formation Factor of Undersaturated Crude Oils
* Total Formation Volume Factor
* Total System Isothermal Compressibility Coefficient
* Crude Oil Viscosity
* Bubble Point and Surface Tension
* Application of the Crude Oil PVT P
* The Material Balance Equation for Oil Reservoirs

Vapor-Liquid Phase Equilibria
* Equilibrium Ratio
* Flash Calculation
* Application of Equilibrium Ratio in Petroleum Engineering

Equation of State
* The General ized Form of Equation of State
* Application of Equation of State for Petroleum Engineering
* Three-Phase Equilibrium Calculation

Splitting Lumping Schemes of Petroleum Fraction
* Splitting Schemes
* Lumping Schemes
* Simulation of Laboratory PVT Data by Equation of State

Physical Properties of  Crude Oil Determination
* Density
* Viscosity
* Surface Tension
* Flash Point
* Pour Point
* Sulphur Contents
* Basic Sediment and Water


Dr. Ir. Sudjati Rachmat, DEA is a lecturer in Petroleum Engineering Department of Bandung Institute of Technology for more than 32 years. His expertise is on the area of reservoir engineering, enhanced oil recovery and reservoir numerical modeling. He also gives training program to the public such as Pertamina, PT. Caltex Pacific Indonesia and some other PSC companies on this subject. On the practical aspects, Dr. Sudjati Rachmat was projects leader in the industries consultation such as Pertamina, Total Indonesie, Vico, Mobil Oil, Gulf, Arco and some other PSC companies.

Mr. Sudjati Rachmat graduated with honour his doctoral degree from  L’Université Claude Bernard, Lyon I, France  in 1987.


The following category of professionals should attend:

1.       Field Young and Senior Operators.

2.       Fresh Petroleum, Reservoir, Production and Facility/Process Engineer

3.       Geoscientist

4.       Asset Management Team members and Business Development Manager

5.       Production Operators, Technician, Maintenance and Operation Personnel who is responsible for the Oil and Gas Reservoir development design and implementation
1. Experienced professional who wants to refresh or broaden their understanding of Oil and Gas Properties in the purposes of fields development.
2. Other professionals who want a better understanding of the subject

Jadwal pelatihan trainingmekatronika.com tahun 2023 :

  • Batch 1 : 11 – 12 Januari 2023 | 25 – 26 Januari 2023
  • Batch 2 : 01 – 02 Februari 2023 | 15 – 16 Februari 2023
  • Batch 3 : 01 – 02 Maret 2023 | 15 – 16 Maret 2023
  • Batch 4 : 04 – 05 April 2023 | 11 – 12 April 2023
  • Batch 5 : 10 – 11 Mei 2023 | 24 – 25 Mei 2023
  • Batch 6 : 07 – 08 Juni 2023 | 21 – 22 Juni 2023
  • Batch 7 : 12 – 13 Juli 2023 | 26 – 27 Juli 2023
  • Batch 8 : 09 – 10 Agustus 2023 |23 – 24 Agustus 2023
  • Batch 9 : 06 – 07 September 2023 | 20 – 21 September 2023
  • Batch 10 : 04 – 05 Oktober 2023 | 18 – 19 Oktober 2023
  • Batch 11 :01 – 02 November 2023 | 15 – 16 November 2023
  • Batch 12 : 05 – 06 Desember 2023 | 12 – 13 Desember 2023

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta training reservoir fluid analysis pasti jalan

Invetasi dan Lokasi pelatihan Application in petroleum engineering di bandung :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan reservoir fluid analysis di bandung :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi ke tempat pelatihan bagi peserta training Application in petroleum engineering bandung pasti running
  • Module / Handout training Participant on reservoir fluid bandung fixed running
  • FREE Flashdisk
  • Sertifikat training PVT and Reservoir Fluid Analysis di bandung murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia