home Bandung, Mechanical & Electrical Maintenance TRAINING SAFE OPERATIONS & MAINTENANCE OF CIRCUIT BREAKERS AND SWITCHGEARS

TRAINING SAFE OPERATIONS & MAINTENANCE OF CIRCUIT BREAKERS AND SWITCHGEARS

TRAINING SAFE OPERATIONS & MAINTENANCE OF CIRCUIT BREAKERS AND SWITCHGEARS

TRAINING SAFE OPERATIONS & MAINTANANCE

TRAINING ELECTRIC ENGINEERS

pelatihan Safe Operations & Maintenance of Circuit Breakers and Switchgears di bandung

DESCRIPTION

Circuit breakers, fused switches and switchgear in the form of motor Control Centres (MCC) are necessary system items for the electrical control of electrical plant. The safe use of these devices and associated equipment requires correct initial selection, operation and maintenance. It is also necessary to have a detailed understanding of how these devices should be installed, the local substation and system ratings, and how the various breakers operate, in order to enable accurate troubleshooting and subsequent repair. Safe Operation & Maintenance of Circuit Breakers and Switchgear will equip participants with new or refreshed skills to ensure that circuit breakers and switchgear are installed, operated safely and maintained in a fashion that ensures safe and stable operation. Also they will be able to identified faults and ensure the underlying causes are identified to reduce possible further failures

OBJECTIVE
* Understanding of the operational characteristics of circuit breakers and switchgear.
* Understanding of troubleshooting procedures, as applied to circuit breakers and associated switchgear.
* Improved capability in the use of test equipment.
* Better understanding of failure modes and failure analysis as applied to fuses, circuit breakers and switchgear. In relation to air break, vacuum and SF6 devices.
* Refreshed awareness of electrical safety concerns within substations and control centres.
* Ability to determine fault levels in substations.

WHO SHOULD ATTEND
* Electrical Engineers
* Electrical Supervisors and
* Senior Electrical Technicians engaged in the operation, maintenance and troubleshooting, of circuit breakers, interruptive devices and switchgear control centres.

CIRCUIT BREAKERS SUMMARY OUTLINE

Day One

The Technology of Circuit Breakers and Switchgear
* Typical substation arrangements and MCC’s
* Definitions and terminology
* Fault level calculations
* Motor and generator fault contributions
* Low voltage equipment
* Medium voltage equipment
* High voltage equipment
* Name plate ratings – interpretation
* CT’s and VT’s
* Basic protection requirements
* Case studies

Day Two

Operation of various types of interrupting equipment
* Fuses – motor starting types
* Fused switches
* Moulded case type breakers
* Air break switches
* Vacuum contactors – fused
* Vacuum circuit breakers
* SF6 puffer, rotating arc devices
* Special insulating requirements for 36kV
* Solid and gaseous insulation – problems!

Day Three

The Operation and Maintenance of Circuit Breakers and Switchgear

The Use of Test Equipment
* Digital voltmeter (DVM)
* Oscilloscopes
* Megger
* Frequency meter
* Temperature probes/ IR pyrometers
* Ammeters
* Power meters
* Load banks
* Cable fault locators

Special techniques
* NEC check lists to ensure the correct installation
* Troubleshooting of Electrical Equipment
* Methods
* Terminology
* Principles
* Special techniques
* Case studies/ examples
* Single line drawings
* Group exercises and case studies

Day Four

The Operation and Maintenance of Circuit Breakers and Switchgear

The Use of Test Equipment
* Digital voltmeter (DVM)
* Oscilloscopes
* Megger
* Frequency meter
* Temperature probes/ IR pyrometers
* Ammeters
* Power meters
* Load banks
* Cable fault locators

Special techniques
* NEC check lists to ensure the correct installation
* Troubleshooting of Electrical Equipment
* Methods
* Terminology
* Principles
* Special techniques
* Case studies/ examples
* Single line drawings
* Group exercises and case studies

Day Four

The Interpretation and use of Drawings
* Single-line electrical drawings
* Control schematics
* Basic generic wiring lists
* Name plate information
* Logic and standard symbols.
* Step and touch potential?

The Development of a Job Plan
* Identification of the troubleshooting step-by-step sequence
* Procedure preparation
* Documentation
* Follow-up
* Safety considerations and training
* Case studies

The Identification and Repair of Problems/ Failures
* Common mode failures
* Phase imbalance – lost phase
* Phase sequence checkout
* Contact pitting/arcing – why?
* Load and fault rating
* Electronic component failure
* Fusing
* Switches
* Control circuits
* Ground faults – cable and busbar faults
* Case studies
* A review of Safety Requirements
* Area classifications
* NEC electrical codes
* Safety information

COURSE SPEAKER

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

COURSE METHODE
* Presentation
* Discuss
* Case Study
* Evaluation
* Simulation

Jadwal pelatihan trainingmekatronika.com tahun 2023 :

  • Batch 1 : 11 – 12 Januari 2023 | 25 – 26 Januari 2023
  • Batch 2 : 01 – 02 Februari 2023 | 15 – 16 Februari 2023
  • Batch 3 : 01 – 02 Maret 2023 | 15 – 16 Maret 2023
  • Batch 4 : 04 – 05 April 2023 | 11 – 12 April 2023
  • Batch 5 : 10 – 11 Mei 2023 | 24 – 25 Mei 2023
  • Batch 6 : 07 – 08 Juni 2023 | 21 – 22 Juni 2023
  • Batch 7 : 12 – 13 Juli 2023 | 26 – 27 Juli 2023
  • Batch 8 : 09 – 10 Agustus 2023 |23 – 24 Agustus 2023
  • Batch 9 : 06 – 07 September 2023 | 20 – 21 September 2023
  • Batch 10 : 04 – 05 Oktober 2023 | 18 – 19 Oktober 2023
  • Batch 11 :01 – 02 November 2023 | 15 – 16 November 2023
  • Batch 12 : 05 – 06 Desember 2023 | 12 – 13 Desember 2023

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta training Keselamatan kerja pada elektrikal pasti jalan

Invetasi dan Lokasi pelatihan Electric engineers di bandung :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan Keselamatan kerja pada elektrikal di bandung :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi ke tempat pelatihan bagi peserta training Electric engineers bandung pasti running
  • Module / Handout training safe operations & maintanance bandung fixed running
  • FREE Flashdisk
  • Sertifikat training Safe Operations & Maintenance of Circuit Breakers and Switchgears di bandung murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia

.