Trainingmekatronika | Training Mesin, Elektro dan Mekatronika TRAINING ALIGNMENT PUMP AND MOTOR | Training Mesin & Elektro free web hit counter





pelatihan Alignment Pump and Motor di jakarta

Motor-Pump alignment is the process of aligning shaft centerlines between a motor and a pump. The motor is the prime mover, transferring power to the pump by the use of a coupling. This is probably the most common configuration of coupled machines in industry.
In this type of alignment, the motor is almost always the moveable machine, and the pump is the stationary machine. In almost all cases, the pump is already piped up with suction and discharge flanges, which means it can move only slightly, if at all.
motor-pump-alignmentProper shaft alignment is achieved by moving the motor. The motor is shimmed vertically to achieve the proper elevation to align it to the pump, both parallel (offset) and angular. The motor is them moved horizontally to achieve proper horizontal placement for aligning the shaft centerlines, both parallel and angular. The motor is moved horizontally by the use of jacking bolts, or by the use of pry bars, hammers, or other tools.
Motors are normally easier to move, since the motor is not piped into a process system. A short run of flexible conduit is most often used to run the electrical wiring from a local disconnect, or a rigid conduit, to the motor termination box. This allows for ease of movement of the motor.

1. Fundamental Alignment
2. Diagnosing Misalignment
3. Measuring Misalignment
4. Preparing Task Alignment
5. Alignment Methods (praktis)
•Rough Methods
•Face and Rim
6. Alignment Tolerances
7. Complicating Factor Alignment.
8. Introduction to Laser Alignment
9. Minimizes the forces of misalignment acting upon the bearings and seals of both components.
10. Minimizes Wear of The Coupling.
11. Reduce Energy Costs.
12. Maximizes the life of the Machine Components by Minimizing Wear, ncreasing time between failures, and reducing vibration.

•Case Study

Who Should Attend
Instrument Engineer/Supervisor, Plant Maintenance/Operators/Supervisors

Mokhamad Munir Fahmi, Ir, MT. And Tim
(CV Terlampir)

Jadwal pelatihan Fundamental Alignment di jakarta :

· 2 – 4 Januari 2019

· 6 – 8 Februari 2019

· 4 – 6 Maret 2019

· 1 – 4 April 2019

· 16 – 18 April 2019

· 2 – 4 Me 2019

· 27 – 29 Mei 2019

· 25 – 27 Juni 2019

· 23 – 25 Juli 2019

· 19 – 21 Agustus 2019

· 24 – 26 September 2019

· 22 – 24 Oktober 2019

· 11 – 13 November 2019

· 18 – 20 Desember 2019

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta training Alignment Methods pasti jalan

Invetasi dan Lokasi pelatihan Measuring Misalignment di jakarta :

· Yogyakarta, Hotel 101 (6.500.000 IDR / participant)

· Jakarta, Hotel Amaris Kemang (6.500.000 IDR / participant)

· Bandung, Hotel Neo Dipatiukur (6.500.000 IDR / participant)

· Bali, Hotel Ibis Kuta(7.500.000 IDR / participant)

· Surabaya, Hotel Amaris, Ibis Style (6.000.000 IDR / participant)

· Lombok, Sentosa Resort (7.500.000 IDR / participant)

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan Alignment Methods di jakarta :

  • FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
  • FREE Akomodasi ke tempat pelatihan bagi peserta training Measuring Misalignment jakarta pasti running
  • Module / Handout training Fundamental Alignment jakarta fixed running
  • FREE Flashdisk
  • Sertifikat training Alignment Pump and Motor di jakarta murah
  • FREE Bag or bagpackers (Tas Training)
  • Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
  • 2xCoffe Break & 1 Lunch, Dinner
  • FREE Souvenir Exclusive
  • Training room full AC and Multimedia