TRAINING MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

TRAINING MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE

TRAINING MACHINERY CONTITION MONITORING

TRAINING PREVENTIVE MAINTENANCE

Background

Industrial machinery or power plant is a major supporter of the industry and has a very high critical rate. This means that if there is a sudden damage, the industry will experience huge losses both morally and materially. Therefore, industrial machine that has a high critical level must be monitoring to avoid a sudden damage.  Maintenance techniques that can be applied is a preventive maintenance which the main point is a scheduled maintenance and predictive maintenance. By applying predictive maintenance, the symptoms of damage can be detected as early as possible and the cost of treatment can be suppressed.

Objectives

• Participants understand machine condition monitoring techniques
• Participants can choose the engine condition monitoring techniques
• Participants can do the monitoring machine condition

Participants

• Electrical Engineer/Supervisor
• Instrument Engineer/Supervisor
• Professionals
• Plant Maintenance/Operators/Supervisors/Superintendent
• Technician

Course Contents Machinery Condition

• Maintenance techniques and  strategies
• Basic regular maintenance
• Basic predictive maintenance
• Bathtub curve
• Selection of machine condition monitoring techniques
• Inspection / monitoring of visual
• Use of lubricants
• Lubricant contaminants
• Inspection / monitoring and analysis of lubricants
• Inspection / monitoring and vibration analysis
• Vibration spectrum analysis
• Inspection and monitoring of geometric
• Analysis of leveling, run out and misalignment
• Alignment shaft

Tools

Modul, Inspection Sheet, vibration measuring tool (Vibrotest 60), Software (Vibroexpert), Straight Gauge, Dial indicator, Laser Alignment, Viscometer

INSTRUKTUR

Instruktur yang mengajar pelatihan  MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE ini adalah instruktur yang berkompeten di bidang  MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE baik dari kalangan akademisi maupun praktisi.

Jadwal pelatihan trainingmekatronika.com tahun 2025 :

• Batch 1 : 30 – 31 Januari 2025
• Batch 2 : 13 – 14 Februari 2025
• Batch 3 : 11 – 12 Maret 2025
• Batch 4 : 16 – 17 April 2025
• Batch 5 : 15 – 16 Mei 2025
• Batch 6 : 25 – 26 Juni 2025
• Batch 7 : 16 – 17 Juli 2025
• Batch 8 : 6 – 7 Agustus 2025
• Batch 9 : 3 – 4 September 2025
• Batch 10 : 8 – 9 Oktober 2025 || 29 – 30 Oktober 2025
• Batch 11 : 13 – 14 November 2025 || 25 – 27 November 2025
• Batch 12 : 15 – 16 Desember 2025

Catatan : Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta training Monitor kondisi mesin pasti jalan

Invetasi dan Lokasi pelatihan Preventive Maintenance di jogja :

· Yogyakarta,

· Jakarta,

· Bandung,

· Bali,

· Surabaya,

· Lombok,

Catatan : Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas  pelatihan Monitor kondisi mesin di jogja :

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara/Stasiun/Terminal)
• FREE Akomodasi ke tempat pelatihan bagi peserta training Preventive Maintenance jogja pasti running
• Module / Handout training Machinery Contition Monitoring jogja fixed running
• FREE Flashdisk
• Sertifikat training Machinery Condition Monitoring for Predictive and Preventive Maintenance di jogja murah
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive
• Training room full AC and Multimedia

.